OMR card - EXC.1

  • OMR700-EXC01

OMR card - EXC.1

EXC.1 - 4x Excitation

Excitation plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanic isolation also between individual outputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.

 

  • 4x Excitation, isolated
  • range: 5 / 10 / 12 / 24 V
Output
Number of output(s)
4 outputs, isolated
Output
5/10/12/24 VDC
Tolerance
±2 % ± 0,2 V
Regulation
±0,1 V
Ripple
< 50 mVpp
Failure bridging
< 200 ms
Efficiency
> 82 %
Functions
active current limitation
Instrument accuracy and functionality
Temperature coefficient
50 ppm/°C
Watch-dog
reset after 500 ms
Calibration
at 25°C and 40 % r.h.
Power supply
Power supply
interní sběrnice 5 VDC/max.150 mA
Operating conditions
Connection
connector terminal board, cable section < 1,5 mm2
Operating temperature
-20°…60°C
Storage temperature
-20°…85°C
Protection class
IP00
El. safety
EN 61010-1, A2
Dielectric strength
2,5 kVAC within 1 min. between bus and inputs
2,5 kVAC within 1 min. between output
Insulation resistance
for polution degree II, measuring cat. III.
input, bus 300 V (ZI), 150 V (Di)*
EMC
EN 61326-1
Seismic capacity
IEC 980: 1993, par.6
Mechanical properties
Dimensions
65 x 98 mm
Installation
plug-in card
Images
Připojení