Search results for term „“
4/6 - digit Data Display
The OMD 202 model series are large programmable displays designed for indoor and outdoor use with IP64 cover.
Type OMD 202RS is a data display from serial lines RS 232/485 with protocole ASCII, MESSBUS, PROFIBUS DP, MODBUS - RTU and PROFINET.
The instrument is based on a single-chip microcontroller with a multichannel 24-bit sigma-delta converter, which ensures good accuracy, stability and easy operation of the instrument.
Displays are suitable for projection of measured data in production lines and operations with legibility up to 80 m.
4/6 - digit Universal Display
The OMD 202 model series are large programmable displays designed for indoor and outdoor use with IP64 cover.
Type OMD 202UNI is a multifunction instrument with the possibility of configuration for 8 different input options, easily configurable in the instrument menu. By further options of input modules it is feasible to enlarge the number of inputs up to 4 (applies for PM). The instrument is based on a single-chip microcontroller with a multichannel 24-bit sigma-delta converter, which ensures good accuracy, stability and easy operation of the instrument.
Displays are suitable for projection of measured data in production lines and operations with legibility up to 80 m.
4/6 - digit Universal Counter
The OMD 202 model series are large programmable displays designed for indoor and outdoor use with IP64 cover.
Type OMD 202UQC is a universal 6-digit panel programmable two-channel counter/frequency meter/signal evaluation from IRC sensors, and timer/clock. The instrument is based on a single-chip microcontroller and efficient gate array, which ensures high accuracy, stability and easy operation of the instrument.
Displays are suitable for projection of measured data in production lines and operations with legibility up to 80 m.
3 1/2 - digit AC Voltmeter and Ammeter
Type OML 343AC is an inexpensive 3,5-digit panel programmable AC voltmeter - ammeter designed for simple applications with depth of the box of only 30 mm.
The instrument is based on a single-chip microcontroller with a true RMS converter, which ensure good accuracy, stability and easy operation of the instrument.
3 1/2 - digit DC Voltmeter and Ammeter
Type OML 343DC is an inexpensive 3,5-digit panel programmable DC voltmeter - ammeter designed for simple applications with depth of the box of only 30 mm.
The instrument is based on a single-chip microcontroller and an A/D converter, which ensure good accuracy, stability and easy operation of the instrument.
3 1/2 - digit Multifunction Instrument
Type OML 343UNI is a multifunction instrument with the possibility of configuration for 8 different input options, easily cofigurable in the instrument menu. Depth of the box only 30 mm.
The instrument is based on a single-chip microcontroller and an A/D converter, which ensure good accuracy, stability and easy operation of the instrument.
6 - digit Data Display RS 485
Type OML 643RS is a 6-digit data display device for data projection from serial line RS 485 with a box depth of only 30 mm. The instrument is based on a single-chip microcontroller, which ensures good accuracy, stability and easy operation of the instrument.
6 - digit Universal Counter
Type OML 643UQC is an inexpensive 6-digit universal counter/frequency meter/clock/timer with a box depth of only 30 mm. The instrument is based on a single-chip microcontroller, which ensures good accuracy, stability and easy operation of the instrument.
4 - digit Data Display
The OMM 323RS is a 4-digit data display for data projection from serial line RS 485.
The instrument is based on a single-chip microprocessor, which ensures good accuracy, stability and easy operation of the instrument.
3 1/2 - digit Multifunction Instrument
The OMM 323 series are simple 3 1/2-digit panel programmable instruments designed for simple applications. Type OMM 323UNI is a multifunction instrument with the possibility of configuration for 8 different input options , easily configurable in the instrument menu. The instrument is based on a single-chip microcontroller and an A/D converter, which ensure good accuracy, stability and easy operation of the instrument.
4 - digit Universal Counter
Type OMM 323UQC is an inexpensive 4-digit universal panel counter/frequency meter/clock/timer designed for maximum usefulness and user comfort while maintaining its fair price. The instrument is based on a single-chip microcontroller, which ensures good accuracy, stability and easy operation of the instrument.
4-digit PASSIVE LOOP DISPLAY 4…20 mA
OMM 335PAS is a 4-digit passive analog loop display 4…20 mA.
The instrument is based on a microcontroller with a very low power consumption and an A/D converter, which ensures good accuracy and easy operation of the instrument. The 22 mm cross-section of the circular instrument body allows its convenient mounting into mosaic and signalling panels.
4-digit PROCESS MONITOR
OMM 335PM is a 4-digit process monitor.
The instrument is based on a microcontroller and an A/D converter, which ensures good accuracy and easy operation of the instrument. The 22 mm cross-section of the circular instrument body allows its convenient mounting into mosaic and signalling panels.
4 digit Data Display RS 485
OMM 335RS is a 4 digit data display from the serial line RS 485.
The instrument is based on a microcontroller, which ensures good accuracy and easy operation of the instrument. The 22 mm cross-section of the circular instrument body allows its convenient mounting into mosaic and signalling panels.
4-digit THERMOMETER FOR Pt/Ni SENSORS
OMM 335RTD is a 4-digit thermometer for resistive Pt/Ni xxx sensors.
The instrument is based on a microcontroller and an A/D converter, which ensures good accuracy and easy operation of the instrument. The 22 mm cross-section of the circular instrument body allows its convenient mounting into mosaic and signalling panels.
4 digit UNIVERSAL COUNTER
OMM 335UC is a 4 digit universal counter/frequency meter/timer/clock.
The instrument is based on a microcontroller, which ensures good accuracy and easy operation of the instrument. The 22 mm cross-section of the circular instrument body allows its convenient mounting into mosaic and signalling panels
3 1/2 - digit DC Voltmeter and Ammeter
The OMM 350 model series are small 3 1/2-digit panel programmable instruments designed for maximum usefulness and user comfort while maintaining their fair price. Type OMM 350DC is a multirange DC voltmeter and ammeter.
The instrument is based on a single-chip microcontroller and an A/D converter, which ensure good accuracy, stability and easy operation of the instrument.
3 1/2 - digit Multifunction Instrument
The OMM 350 model series are small 3 1/2-digit panel programmable instruments designed for maximum usefulness and user comfort while maintaining their fair price. Type OMM 350UNI is a multifunction instrument with the possibility of configuration for 8 different input options, easily configurable in the instrument menu. The instrument is based on a single-chip microcontroller and an A/D converter, which ensure good accuracy, stability and easy operation of the instrument.
6 - digit Universal Counter
OMM 650UC is an inexpensive universal counter/frequency meter/clock/timer. The instrument is based on a single-chip microcontroller, which ensures good accuracy, stability and easy operation of the instrument.
Stabilized Source to DIN Rail
The OMP 100 is a universal source with active compensation of the power factor. The source is in a plastic box with terminal board to DIN rail.
On the face of the transmitter there is a two-color LED, which indicates the operation status of the source.
Stabilized Source to DIN Rail
The OMP 38 is a stabilized source for sensor power supply. The source is in a plastic box with terminal board to DIN rail.
On the face of the transmitter there are LEDs, which indicate the operation status of the source.
2x Analogue output
Analogue outputs plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanic isolation also between individual outputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
4x Analogue output
Analogue outputs plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanic isolation also between individual outputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
.
PROFIBUS
The data communication plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanically isolated output.
The card must be placed in position B5. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
PROFINET
The data communication plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanically isolated output.
The card must be placed in position B5. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
4x Excitation
Excitation plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanic isolation also between individual outputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
3x Universal input
Universal inputs plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanic isolation also between individual inputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
4x Analogue input
Analogue inputs plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanic isolation also between individual inputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
4x Pt xxx/Cu xxx/Ni xxx
Plug-in card for measuring resistance sensors is fully isolated from the internal bus with a galvanic isolation also between individual outputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
4x T/C - J/K/T/E/B/S/R/N/L
Plug-in card for measuring termocouple sensors is fully isolated from the internal bus with a galvanic isolation also between individual outputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
5x Pt xxx/Cu xxx/Ni xxx
Plug-in card for measuring resistance sensors is fully isolated from the internal bus with a galvanic isolation also between individual outputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
12x Analogue input, current
Analogue inputs plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanic isolation also between individual inputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
12x Analogue input, voltage
Analogue inputs plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanic isolation also between individual inputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
2x Input for strain gauges
Plug-in card for strain gauges measurement is fully isolated from the internal bus with a galvanic isolation also between individual inputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
3x Precise analogue input
Analogue inputs plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanic isolation also between individual inputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
2x AC voltage/current, Power
Plug-in card for measurements of voltage (VRMS), current (ARMS), frequency (Hz), power P, Q, S, and cos fi for the OMR 700 is fully isolated from the internal bus with a galvanic isolation also between individual inputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
8x AC/DC Control inputs
The A/D inputs plug-in card for control/measurement of the OMR 700 is fully isolated from the internal bus.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
12x UP/DW Counter - frequency
Universal counter plug-in card for the OMR 700 is fully isolated from the internal bus.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
2x UP/DW Counter - frequency, IRC
Universal counter plug-in card for the OMR 700 is fully isolated from the internal bus.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
1x 3-F Wattmeter
Plug-in card for measurements of 3-phase power, voltage (VRMS), current (ARMS), frequency (Hz), power P, Q, S, harmonic distortion, angle and cos fi for the OMR 700 is fully isolated from the internal bus with a galvanic isolation also between individual inputs.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
4x SPDT relay
Relay output plug-in card for the OMR 700 is fully isolated from the internal bus.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
8x Normally open relay
The plug-in card with relay output for the OMR 700 is fully isolated from the internal bus.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
8x Open collector NPN
Outputs plug-in card with open collectors for the OMR 700 is fully isolated from the internal bus.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
16x Open collector NPN
Outputs plug-in card with open collectors for the OMR 700 is fully isolated from the internal bus.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements.
8x Open collector PNP
Outputs plug-in card with open collectors for the OMR 700 is fully isolated from the internal bus.
The design of the cards allows their use at any position in the device. If during the use of the device appear new requirements to increase the number of inputs or outputs, just order another card and insert it into a free slot. In this manner the device can "grow" with your requirements
IoT relay/switch
Intelligent switching relay to be connected to sensors. The OMT 1550 can be combined with detectors, controllers or system elements to control the sensors used.
4 - digit Measuring Instrument
The OM 408UNI is an 8-channel measuring instrument designed for maximum usefulness and user comfort while maintaining its fair price. It is a multifunction instrument with the possibility of configuration for 8 different input options, easily configurable in the instrument menu. The instrument is based on a single-chip microcontroller with multichannel 24-bit sigma-delta converters, which ensure good accuracy, stability and easy operation of the instrument. Owing to the high rate of sampling on individual channels, there is a chance of evaluating all measuring inputs at the same time.
Universal Isolated Digital Transmitter
The OMX 103 model series are programmable DIN rail mountable transmitters, designed for maximum efficiency and user comfort while keeping their favourable price.
Type OMX 103UNI is a multifunctional two-input instrument with the possibility of 8 input configurations easily adjustable in the instrument´s menu.
The instrument is based on a single-chip microcontroller with 24-bit A/D converter, which ensures good accuracy, stability and easy operation of the instrument. As a standard the instrument is fitted with a backlit LCD display, enabling clear projection of measured values and configuration settings.
Isolated Digital Transmitter
The OMX 200 model series are digital DIN rail mounted signal converters housed in an enclosure only 12.5 mm wide.
The OMX 212PM type is a simple single-channel isolator/splitter with a convenient setting of the input and output ranges either using a DIP switch on the side of the housing or the free OM Link SW from a PC.
You can also use this converter as a splitter into 2 analogue outputs.
This device is based on a microprocessor with a 24-bit ∆∑ A/D converter, which guarantees high accuracy and excellent stability.
Isolated Digital Transmitter DC V-A
The OMX 333 model series are simple DIN rail mountable programmable transmitters.
Type OMX 333DC is a transmitter used for measurements of higher DC voltage and current easily adjustable in the instrument´s menu.
The instrument is based on a single-chip microcontroller with a 16-bit A/D and D/A converter, which ensures good accuracy, stability and easy operation of the instrument.
Isolated Digital Transmitter Number/Frequency
The OMX 333 model series are simple DIN rail mountable programmable transmitters.
Type OMX 333UQC is a universal transmitter - counter/frequency meter/timer/clock adjustable in the instrument´s menu.
The instrument is based on a single-chip microcontroller, which ensures good accuracy, stability and easy operation of the instrument.
Isolated Analog Transmitter AC V-A
The OMX 39 model series are inexpensive and simple DIN rail mountable analog transmitters.
Type OMX 39AC is a transmitter for galvanic separation of AC voltage or current.
The transmitters have galvanic separation with insulation voltage of 600 V. They are therefore suitable as primary insulation for majority of industrial applications.
Isolated Analog Transmitter DC V-A
The OMX 39 model series are inexpensive and simple DIN rail mountable analog transmitters.
Type OMX 39DC is a transmitter for galvanic separation of DC voltage or current.
The transmitters have galvanic separation with insulation voltage of 600 V. They are therefore suitable as primary insulation for majority of industrial applications.
Isolated Analog Transmitter for Linear Potentiometers
The OMX 39 model series are inexpensive and simple DIN rail mountable analog transmitters.
Type OMX 39DU is a transmitter for galvanic isolation of linear potentiometers.
The transmitters have galvanic separation with insulation voltage of 600 V. They are therefore suitable as primary insulation for majority of industrial applications.
Isolated Analog Transmitter for Ohmmeters
The OMX 39 model series are inexpensive and simple DIN rail mountable analog transmitters.
Type OMX 39OHM is a transmitter for galvanic separation of resistance. The transmitters have galvanic separation with insulation voltage of 600 V. They are therefore suitable as primary insulation for majority of industrial applications.
Isolated Analog Transmitter/Separator
The OMX 39 model series are inexpensive and simple DIN rail mountable analog transmitters.
Type OMX 39PM is a galvanic separator. The transmitters have galvanic separation with insulation voltage of 600 V. They are therefore suitable as primary insulation for majority of industrial applications.
Isolated Analog Transmitter for Thermometers Pt xxx
The OMX 39 model series are inexpensive and simple DIN rail mountable analog transmitters. Type OMX 39RTD is a transmitter for galvanic separation of thermal resistance sensors Pt 100/500/1000. The transmitters have galvanic separation with insulation voltage of 600 V. They are therefore suitable as primary insulation for a majority of industrial applications.
Isolated Analog Transmitter for Wattmeters
The OMX 39 model series are inexpensive and simple DIN rail mountable analog transmitters. Type OMX 39W is a transmitter for galvanic separation and measurement of power consumption. The transmitters have galvanic separation with insulation voltage of 600 V. They are therefore suitable as primary insulation for a majority of industrial applications.
Isolated digital transmitter RS 485 / PROFIBUS
The transmitter is designed for easy and cost-effective connection of ORBIT MERRET™ instruments to PROFIBUS line with installation to DIN rail. One device can control up to 31 instruments via the RS 485 line with communication protocol OM ASCII.
Multifunction calibrator with an accuracy of 0.2% + 4 digits.
Generates: DC 100mV, 10V, 20mA, TC
Measures: DC 100mV, 30V, 20mA, TC
Isolated Digital Transmitter
The OMX 200 model series are digital DIN rail mounted signal converters housed in an enclosure only 12.5 mm wide.
The OMX 211PM type is a simple single-channel isolator with a convenient setting of the input and output ranges either using a DIP switch on the side of the housing or the free OM Link SW from a PC.
This device is based on a microprocessor with a 24-bit ∆∑ A/D converter, which guarantees high accuracy and excellent stability.
Universal Isolated Digital Transmitter
The OMX 300 model series are digital DIN rail mounted signal converters housed in an enclosure only 17.5 mm wide.
The OMX 311UNI type is a galvanic isolated single-channel universal signal converter. It can be configured for 10 different input variants. Setting of both the input and output ranges can be done conveniently by a DIP switch located on the side of the housing or from a PC via the OM Link SW.
This device is based on a microprocessor with a 24-bit ∆∑ A/D converter, which guarantees high accuracy and excellent stability
Universal Isolated Digital Transmitter
The OMX 300 model series are digital DIN rail mounted signal converters housed in an enclosure only 17.5 mm wide.
The OMX 312UNI type is a galvanic isolated single-channel universal signal converter / splitter. It can be configured for 10 different input variants. Setting of both the input and output ranges can be done conveniently by a DIP switch located on the side of the housing or from a PC via the OM Link SW.”You can also use this converter as a splitter into 2 analogue outputs.
This device is based on a microprocessor with a 24-bit ∆∑ A/D converter, which guarantees high accuracy and excellent stability.
ISOLATED TRANSDUCER • USB < > RELAY
Small compact OMT 01 USB module with relay output and PC control.
Universal Isolated Digital Transmitter
The OMX 333i model series are simple DIN rail mountable programmable transmitters.
Type OMX 333iUNI is a multifunctional transmitter with the possibility of 10 input configurations easily adjustable in the instrument´s menu.
This device is based on a microprocessor with a 24-bit ∆∑ A/D converter and D/A converter, which ensures good accuracy, stability and easy operation of the instrument.
Fast Isolated Digital Transmitter for potentiometers
The OMX 390 model series are very fast DIN rail mountable digital transmitters with a Teach-in function.
Type OMX 390DU is a isolated transmitter for potentiometers. Setting of both the input and output ranges can be done conveniently by a DIP switch located on the side of the housing or from a PC via the OM Link SW. This device is based on a 32-bit processor, fast 24-bit ∆Σ ADC with PGA and 16-bit DAC, which guarantees high accuracy and excellent stability.
Fast Isolated Digital Transmitter / Separator
The OMX 390 model series are very fast DIN rail mountable digital transmitters with a Teach-in function.
Type OMX 390PM is a isolated transmitter. Setting of both the input and output ranges can be done conveniently by a DIP switch located on the side of the housing or from a PC via the OM Link SW. This device is based on a 32-bit processor, fast 24-bit ∆Σ ADC with PGA and 16-bit DAC, which guarantees high accuracy and excellent stability.
Fast Isolated Digital Transmitter for Strain Gauges
The OMX 390 model series are very fast DIN rail mountable digital transmitters with a Teach-in function.
Type OMX 390T is a transmitter for strain gauges. Setting of both the input and output ranges can be done conveniently by a DIP switch located on the side of the housing or from a PC via the OM Link SW. This device is based on a 32-bit processor, fast 24-bit ∆Σ ADC with PGA and 16-bit DAC, which guarantees high accuracy and excellent stability.
Fast Isolated Digital Transmitter for LVDT sensors
The OMX 390 model series are very fast DIN rail mountable digital transmitters with a Teach-in function.
Type OMX 390LVDT is a transmitter for LVDT sensors. Setting of both the input and output ranges can be done conveniently by a DIP switch located on the side of the housing or from a PC via the OM Link SW. This device is based on a 32-bit processor, dual 24-bit ∆Σ ADC with PGA, demodulato, wake-up signal generator and 16-bit DAC, which guarantees high accuracy and excellent stability.
6-digit Multifunction Instrument
The OM 403 model series represents 6-digit panel digital instruments designed with an emphasis on maximum efficiency and user comfort, while maintaining a favorable price.
Type OM 403UNI is a multifunctional device that can be easily configured for a wide variety of input signals in the device menu. Despite its versatility, the setup and operation of the device remain user-friendly, thanks to two displays, touch keys with color navigation and haptic feedback, and above all thanks to the integrated Setup Wizard.
The device is based on a 32-bit processor and a multi-channel 24-bit ΔΣ ADC, which guarantee high accuracy, stability and easy operation.
Equipment for remote measurement
In the present era of digitalization and the Internet of Things (IoT), the OMT 1100 brings you a simple way to improve remote monitoring and data collection in various industries.
OMA 713 is a portable case for OMR 700 for particularly demanding environments, with high dust, humidity or even with the risk of flooding the entire device.
Robust metal housing industrial grade potentiometers with repeatability of 0.007°.
Very robust metal housing, heavy duty, industrial grade potentiometers with repeatability of 0.007°.
The inductive position transducer series F 200 converts small rectilinear displacements into electrical analogue signals by means of a differential transformer with a movable core.The core is mounted on a pushrod wich may be pressed by a built-in spring against the object to be measured, or rigidly connected to the object. The transducer is supplied with a DC voltage. A built-in oscillator provides an AC voltage to supply the diffential transfomer.The secondary voltages of the transformer are rectified by a demodulator which is also built-in. The oscillator and the demodulator are hybrid circuits.
The inductive precision sensor FTI is used to transform shortl inear travel paths into analogue electrical signals using a differential transformer with a movable core.The core is located on a gauging pin which is pressed against the measured object by an integrated spring. The sensor is supplied with direct voltage from which an integrated oscillator generates alternating voltage to feed the differential transformer. The secondary transformer voltages are rectified in a built-in demodulator. The oscillator and demodulator are designed using hybrid technology. The output current is strictly proportional to the displacement of the core and therefore to the measured path.
Geared multi-turn potentiometers with 3:1, 5:1 and 10:1 reduction ratios.Geared potentiometers of this series supply an analogue output signal proportional to the number of turns.
Geared multi-turn potentiometers with 3:1, 5:1 and 10:1 reduction ratios.Geared potentiometers of this series supply an analogue output signal proportional to the number of turns.
Heavy duty geared multi-turn potentiometers with 3:1, 5:1 and 10:1 reduction ratios.Geared potentiometers of this series supply an analogue output signal proportional to the number of turns.
Industrial-Grade Potentiometers
Precision servo size 20 potentiometer series with repeatability to 0.007°
The IPS6000 is a high qualitypotentiometer that providesan output voltage proportionalto the angle of rotation, over amaximum range of 355°. Very robust metal housing, heavy duty, industrial grade potentiometers with repeatability of 0.007°.
The IPX7900 was developed for measuring the steering angle in electro-hydraulic steering systems. It offers reliable operation in mobile applications, under extreme environmental conditions. Very durable angle sensors with stainless steel shafts and anodized aluminum housings.
Micro USB 2.0 cable, A-B with a length of 2 m, for connecting devices to a PC.
Double shielded 2x AWG28, supports up to 480 Mbps.
Membrane sensor potentiometers are very flat and canbe glued to plane surfaces in the required form.
Another advantage is the hermetically sealed structure of the membrane sensor potentiometer. Dirt, dust or humidity can not invade the sensor and therefore the use in a difficult environment is possible. It must be emphasized that the handling is very simple since the sensitive potentiometer track is protected by the coversheet.
The integrated signal processor with Teach-In function provides an absolute and proportional current or voltage output signal.The non-contacting sensors are maintenance and wear-free and convince with an optimal reproducibility, resolution and linearity. The sensor can be exchanged without recalibration. Magnetic fields do not have any effect on the signal measurement.
• Rod and cylinder design with twin slide bearings and lip seal
• Backlash free mounting via spherical rod end bearings with large pivot angle of ±12.5 degrees
• Outstanding linearity
• Resolution better than 0.01 mm
• Long life up to 50 Mio. movements
• Protection class IP65
• Cable or connector version available
All purpose potentiometer. Actuated by a rod with a thread on its end. Oustanding lineratiy and longevity.
Designed for extreme operating environments, the LWX series features an all-metal construction and a pressurecompensation technology to prevent buildup that coulddegrade operation in mechani-cal, vehicle, automation androbotic applications where anextended operating life isessential.
Designed for extreme operating environments, the LWX series features an all-metal construction and a pressurecompensation technology to prevent buildup that coulddegrade operation in mechani-cal, vehicle, automation androbotic applications where anextended operating life isessential.
- « první
- ‹ předchozí
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- …
- následující ›
- poslední »